PRODUCT DETAILS
▲The main material requirements are high-strength aluminum alloy profiles,not less than 6063, and the processing grade reaches T5 standard. The overall fully enclosed design, no sharp angle on the surface, no exposed screws,imported powder coating surface treatment;
▲ Through the static force load test, under the load state, the angular offset of the cantilever angle relative to the horizontal position is ≤ 1.5°
▲ Gas terminal All gas sockets and joints are produced by the original factory, the terminal has passed antibacterial (E. coli) detection, gas sockets are identified as different colors and different shapes, with anti-misinsertion function, and have Standby (in-place to be connected) function, socket plug
can ensure more than 20,000 times of plugging and unplugging, can be repaired with gas.
▲The power socket is AC 220V and has a separate grounding wire, the socket needs to have an equipotential grounding terminal, the grounding wire shall not be shared with the grounding of the pendant, and communication interfaces, video interfaces, network interfaces and other equipment can be installed as needed.
▲The tower bearing adopts needle roller type, and the number of rotations is not less than 100,000 times.
1. The maximum bearing weight of the pendant tower ≥ 680Kg★26. The pendant tower has a safety load device with four times the load-bearing coefficient.
2. The rotation angle of the boom (including boom column) is not less than 340°, six-point damping brake system, and the resistance is adjustable.
3. Pallet carrying weight≥ 80kg; Pallet with drawer carrying weight≥ 50kg; Drawer carrying capacity≥ 20kg.
4. The rotation angle of the crossarm of the three-chamber pendant tower is ≥ 340º, the length of the crossarm of the double-arm surgical tower is≥850mm+600mm, the length of the crossarm of the single-arm surgical tower is ≥ 850mm, the width ≥ is 190mm, the height ≥ is 125mm, and the wall thickness is ≥ 10mm;
5. The length of the hanging pipe connected to the tower box can be customized according to the height of the room, the diameter is ≥ 100mm, and the wall thickness is ≥4mm;
6. The tower box rotates ≥ 340º, the height is ≥ 900mm, the trapezoidal box has no angular design (length 36CM * width 21CM), the left and right sides of the box body are equipped with a stainless steel infusion pump bracket, the syringe pump frame is fixed up and down, the upper section is a four-section pagoda-shaped, and the lower section is a spiral fixed structure.
7. The center distance between the infusion pump brackets on both sides is ≥ 450mm, the length of the infusion pump bracket is ≥830mm, and the diameter of the infusion pump bracket is ≥ 25mm; Can hang ≥ 6 infusion pump syringe pump of different specifications; Equipped with a rotatable extension infusion rack*1 set, swivel arm ≥ 350mm.
8. Box tray: each set of box is equipped with *2, and the pendant tray is an eight-cavity aluminum alloy integrated die-casting molding; The pallet fixing method adopts reinforced aluminum alloy tripod support, the tripod is ≥ 120mm long, 40mm wide ≥, ≥8mm thick, the center distance of the fixed slide rail on both sides is ≥134mm, the length of the pallet including side rail is ≥515mm, the length of the side rail is not included≥ 455mm, the width ≥ is 400mm, the thickness ≥ is 25mm, the stainless steel side rail on both sides is ≥ 350mm, the width ≥ is 10mm, the height ≥is 20mm, and the hanging net basket is optional;
9. Drawers: each set of boxes is equipped with *1pc, the inner diameter of the drawer is ≥ 320mm, the width ≥ is 240mm, the height ≥ is 120mm, and the pull-out length is ≥ 20mm; Drawer outer diameter size≥ length 430mm, width ≥ 300mm, height ≥ 160mm; Drawer with automatic suction design;
▲Each set of boxes is equipped with air source: oxygen * 2pcs, negative pressure suction * 2pcs, compressed air * 1pc; Optional negative pressure suction device and oxygen inhaler
▲Each set of boxes is equipped with 6 power sockets≥ (compatible with national, American and British standards);
▲Each set of boxes is equipped with grounding terminals *2pcs, network interface *1pc; The configuration can be upgraded and can be flexibly selected according to user requirements.
Standard configuration:
Base *1 set、Shield *1 pc、Crossarm *3 sets、Box *2 sets、Pallet *4 pcs、Drawers *2 pcs、Infusion rack *2 pcs、Oxygen * 4 pcs、Negative pressure suction * 4 pcs、Compressed air *2 pcs、Sockets *12 pcs、
Grounding terminal * 4 pcs、Network cable interface*2 pcs、Manufacturer qualification information * 1 set
