PRODUCT DETAILS
▲The mechanical properties and structural strength of the pendant tower under the action of impact meet the design requirements and the ability of its connecting parts to withstand the impact, and the pendant tower passes the anti-collision test
▲The mechanical structure strength of the hanging tower meets the design requirements and the seismic ability in the seismic environment under the seismic experimental environment, and the hanging tower has passed the seismic ≥ level 7 test
▲The horizontal cross arm of the pendant tower has a safety bearing device, and the pendant tower has a central shaft rotating device
▲The inside of the pendant tower adopts a gas-electricity separation design to ensure the safety of use: the bottom end of the pendant box must have an oxygen drainage hole design to prevent the accumulation of oxygen in the tower and the power line caused by fire accidents.
▲ Through the static force load test, under the load state, the angular offset of the cantilever angle relative to the horizontal position is ≤ 1.5°
▲The power socket is AC 220V and has a separate grounding wire, the socket needs to have an equipotential grounding terminal, the grounding wire shall not be shared with the grounding of the pendant, and communication interfaces, video interfaces, network interfaces and other equipment can be installed as needed.
▲The tower bearing adopts needle roller type, and the number of rotations is not less than 100,000 times.
★ The maximum carrying capacity of the pendant tower ≥ 680Kg
★ The pendant tower has a four-fold load-bearing factor safety load device.
1. The rotation angle of the boom (including the boom column) is not less than 340°, and the six-point damping brake system has adjustable resistance.
2. Pallet carrying weight≥ 80kg; Pallet with drawer carrying weight≥ 50kg; Drawer carrying capacity≥ 20kg.
3. The length of the middle shaft of the pendant tower ≥ 180mm, and the diameter ≥ 110mm; Wall thickness≥ 17mm;
4. Cavity pendant cross arm rotation angle≥ 340º, length ≥ 850mm+600mm, width ≥ 190mm, height ≥ 125mm, wall thickness ≥ 10mm;
The length of the hanging pipe connected to the tower box can be customized according to the height of the room, the diameter is ≥ 100mm, and the wall thickness is ≥4mm;
5. The tower box rotates ≥ 340º, the height ≥ 900mm, the trapezoidal box has no angular design (length 36CM x width 21CM), the left and right sides of the box body are equipped with a stainless steel infusion pump bracket, the upper and lower fixation devices of the syringe pump frame, the upper section is a four-section pagoda-shaped, and the lower section is a spiral fixed structure.
6. The center distance between the infusion pump brackets on both sides is ≥ 450mm, the length of the infusion pump bracket is ≥830mm, and the diameter of the infusion pump bracket is ≥ 25mm; Can hang ≥ 6 infusion pump syringe pump of different specifications; Equipped with a rotatable extension infusion rack*1 set, swivel arm ≥ 350mm.
7. Box tray: 2pcs, pendant tray is eight-cavity aluminum alloy integrated die-casting molding; The pallet fixing method adopts reinforced aluminum alloy tripod support, the tripod is ≥ 120mm long, 40mm wide ≥, ≥8mm thick, the center distance of the fixed slide rail on both sides is ≥134mm, the length of the pallet including side rail is ≥515mm, the length of the side rail is not included≥ 455mm, the width ≥ is 400mm, the thickness ≥ is 25mm, the stainless steel side rail on both sides is ≥ 350mm, the width ≥ is 10mm, the height ≥is 20mm, and the hanging net basket is optional;
8. Drawer: 1pc, inner diameter of drawer≥ 320mm, width ≥ 240mm, height ≥ 120mm, pull-out length ≥ 20mm; Drawer outer diameter size≥ length 430mm, width ≥ 300mm, height ≥ 160mm; Drawer with automatic suction design;
▲Each set is equipped with air source: oxygen * 2pcs, negative pressure suction * 2pcs, compressed air * 1pc; Optional negative pressure suction device and oxygen inhaler
▲Each set of configuration ≥ 6 power sockets (compatible with national, American and British standards);
▲Grounding terminal *2pcs; Network interface *1pc; The configuration can be upgraded and can be flexibly selected according to user requirements..
Standard configuration:
Base *1 set、Shield* 1 pc、Horizontal arms *2 sets、Pipes *1 set、Box *1 set、Pallets *2 pcs、drawers *1 pc、Infusion stand *1 pc、Oxygen *2 pcs
Negative pressure suction *2 pcs、Compressed air *1 pc、receptacle *6 pcs、Grounding terminal *2 pcs、Network cable interface *1 pc、
Manufacturer qualification information *1 set
