PRODUCT DETAILS
▲The main material requirements are high-strength aluminum alloy profiles, not less than 6063, and the processing grade reaches T5 standard. The overall fully enclosed design, no sharp angle on the surface, no exposed screws, imported powder coating surface treatment;
▲The horizontal cross arm of the suspension bridge has a safety bearing load, and the suspension bridge has a central shaft rotation device.
▲The inside of the suspension bridge box adopts a gas-electricity separation design to ensure the safety of use: the bottom end of the box must have an oxygen drain hole design to prevent the accumulation of oxygen in the tower and the power line caused by fire accidents.
▲ Gas terminal all gas sockets and joints are produced by the original factory, the terminal through antibacterial (E. coli) detection, gas sockets are identified as different colors and different shapes, with anti-mis-insertion function, and have Standby (in place to be connected) function, socket plug can ensure more than 20,000 times of plugging and unplugging, can be repaired with gas;
▲The power socket is AC 220V and has a separate grounding wire, the socket needs to have an equipotential grounding terminal, the grounding wire shall not be shared with the grounding of the pendant, and communication interfaces, video interfaces, network interfaces and other equipment can be installed as needed.
▲The suspension axle bearing adopts needle roller type, and the number of rotations is not less than 100,000 times.
★ The suspension bridge has a safety load device with a fourfold load factor
1. Working power: AC220V, 50Hz; Input power: 6KVA;
2. The bridge body is designed with an arc-type inner groove, and the length of the bridge body is 2000~3000mm (the actual size is subject to the actual measurement of the user's site); The beam is 500mm wide and 220mm high.
3. Equipped with ambient lighting *2pcs, optional LED auxiliary lighting with independent suspension arm system, the number of LED lamp beads ≥ 28, the diameter of the lamp head is ≤ 20cm, and the illuminance ≥ 35000LUX
4. Standard configuration of gas terminal: oxygen * 2pcs, negative pressure suction * 2pcs, compressed air * 1pcs; Optional negative pressure suction device, oxygen supply system oxygen inhaler
5. Frame box structure design, 1pc (left and right moving distance≥ 1000mm); The overall frame is made of 304 stainless steel, the beam length is 650mm, the beam width is 60mm, and the beam height is 40mm;
6. Instrument platform: instrument platform: 2 layers (bearing weight≥ 50Kg, height adjustable), pallet thickness 230mm, length ≥ 540mm, width ≥440mm, two frame distance 620mm, optional hanging net basket, etc
7. Drawer: 1pc, carrying weight≥ 20Kg. Drawer inner diameter ≥ 40mm, width ≥ 250mm, height ≥ 60mm, drawer with automatic suction design;
8. Curved shell under the beam: with aluminum alloy hanging frame, hanging frame length 300mm, width 10mm, height 230mm;
9. Ceiling installation, stable and firm.
