PRODUCT DETAILS
▲The main material requirements are high-strength aluminum alloy profiles, not less than 6063, and the processing grade reaches T5 standard. The overall fully enclosed design, no sharp angle on the surface, no exposed screws.
▲The horizontal cross arm of the suspension bridge has a safety load-bearing load
▲The inside of the suspension bridge box adopts a gas-electricity separation design to ensure the safety of use: the bottom end of the box must have an oxygen drain hole design to prevent the accumulation of oxygen in the tower and the power line caused by fire accidents
▲ Gas terminal all gas sockets and connectors are produced by the original factory, gas sockets are identified as different colors and different shapes, with anti-misinsertion function, and have Standby (in-situ to be connected state) function, socket plug can ensure more than 20,000 times of plugging and unplugging, can be repaired with gas, socket for AC 220V and has a separate grounding wire, socket needs to have equipotential grounding terminal, grounding wire shall not be shared with the tower grounding, communication interface, video interface, network interface and other equipment can be installed as needed.
▲The suspension bridge box bearing adopts needle roller type, and the number of rotations is not less than 100,000 times
★ The suspension bridge has a safety load device with a fourfold load factor.
1. Working power: AC220V, 50Hz; Input power: 6KVA;
2. The bridge body is designed with an arc-type inner groove, and the length of the bridge body is 2000~3000mm (the actual size is subject to the actual measurement of the user's site); The beam is 500mm wide and 220mm high;
3. Configure ambient lighting *2psc, optional LED auxiliary lighting with independent suspension arm system, the number of LED lamp beads ≥ 28, the diameter of the lamp head ≤ 20cm, the illuminance ≥ 35000LUX (provide a copy of the medical device registration certificate with the manufacturer's official seal, the original is for reference);
4. Dry and wet box: 1pc, using imported linear guide rail, (provide a copy of the import declaration form with the manufacturer's official seal, the original for reference) The tower body can move left and right ≥500mm.
5. Box rotation≥ 340º, height ≥ 800mm, width ≥ 450mm. The diamond-shaped box has no angular design, and the left and right sides of the box are equipped with a stainless steel infusion pump bracket, and the syringe pump frame is fixed up and down, the upper section is a four-section pagoda-shaped, and the lower section is a spiral fixed structure.
6. The center distance between the infusion pump brackets on both sides is ≥ 500mm;
7. Instrument platform: 2 layers (bearing weight≥ 50Kg, height adjustable), pallet thickness 230mm, length ≥ 440mm, width ≥ 430mm, length (including side rail size) ≥ 510mm, stainless steel side rails on both sides length ≥ 350mm, width ≥ 10mm, height ≥ 20mm, optional hanging net basket, etc
8. The pallet fixing method adopts reinforced aluminum alloy tripod support, the length of the tripod is ≥ 155mm, and the thickness is ≥7mm;
9. Drawer: 1pc, carrying weight≥ 20Kg. Drawer inner diameter ≥ 40mm, width ≥ 270mm, height ≥ 70mm, drawer with automatic suction design;
10. Standard configuration of gas terminal: oxygen *2pcs, negative pressure suction *2pcs, compressed air *1pc; Optional negative pressure suction device, oxygen supply system oxygen inhaler
11. Power sockets: 6pcs, 220V, 10A (compatible with international plugs);
12. Grounding terminal: 2pcs; Network interface: RJ45, 1pc;
13. Top installation, stable and firm.
