PRODUCT DETAILS
▲The main material requirements are high-strength aluminum alloy profiles,not less than 6063, and the processing grade reaches T5 standard. The overall fully enclosed design, no sharp angle on the surface,
no exposed screws.
▲The inside of the suspension bridge box adopts a gas-electricity separation design to ensure the safety of use: the bottom end of the box must have an oxygen drain hole design to prevent the accumulation
of oxygen in the tower and the power line caused by fire accidents
▲The suspension bridge box bearing adopts needle roller type, and the number of rotations is not less than 100,000 times.
★ The suspension bridge has a safety load device with a fourfold load factor.
1. Working power: AC220V, 50Hz; Input power: 6KVA;
2. The bridge body is designed with an arc-type inner groove, and the length of the bridge body is 2000~3000mm (the actual size is subject to the actual measurement of the user's site); The beam is 500mm wide and 220mm high;
3. Configure ambient lighting *2pcs, optional LED auxiliary lighting with independent suspension arm system, the number of LED lamp beads ≥ 28, lamp head diameter ≤ 20cm, illuminance ≥ 35000LUX;
4. Wet section tower: 1pc, using imported linear guide rail tower body can move left and right distance ≥ 500mm.
5. The wet section box rotates ≥ 340º, the height ≥ 800mm, and the width ≥ 450mm. The diamond-shaped box has no angular design, and the left and right sides of the box are equipped with a stainless steel infusion pump bracket, and the syringe pump frame is fixed up and down, the upper section is a four-section pagoda-shaped, and the lower section is a spiral fixed structure.
6. The center distance between the infusion pump brackets on both sides is ≥ 500mm; Equipped with 1 set of rotatable extension infusion stand, swivel arm ≥ 350mm.
7. Instrument platform: 2 layers (bearing weight≥ 50Kg, height adjustable), pallet thickness 230mm, length ≥ 440mm, width ≥ 430mm, length (including side rail size) ≥ 510mm, stainless steel side rails on both sides length ≥ 350mm, width ≥ 10mm, height ≥ 20mm, optional hanging net basket, etc
8. The pallet fixing method adopts reinforced aluminum alloy tripod support, the length of the tripod is ≥ 155mm, and the thickness is ≥7mm;
9. Drawer: 1 pc, bearing weight ≥ 20Kg, drawer inner diameter length ≥ 40mm, width ≥ 270mm, height ≥ 70mm, drawer with automatic suction design;
10. Standard configuration of gas terminal: oxygen * 1pc, compressed air * 1pc, negative pressure suction * 1pc; Optional negative pressure suction device, oxygen supply system oxygen inhaler.
11. Power sockets: 6pcs, 220V, 10A (compatible with international plugs);
12. Grounding terminal: 2pcs; Network interface: RJ45, 1pc;
13. Dry section tower: 1pc, the imported linear guide tower body can move left and right ≥ 500mm.
14. Dry section box rotation≥ 340º, height ≥ 800mm, width ≥ 450mm. The diamond-shaped box has no angular design, and the left and right sides of the box are equipped with a stainless steel infusion pump bracket, and the syringe pump frame is fixed up and down, the upper section is a four-section pagoda-shaped, and the lower section is a spiral fixed structure.
15. The center distance between the infusion pump brackets on both sides is ≥ 500mm;
16. Instrument platform: 2 layers (bearing weight≥50Kg, height adjustable), tray thickness 230mm, length ≥ 440mm, width ≥ 430mm, length (including side rail size) ≥ 510mm, stainless steel side rails on both sides ≥ length 350mm, width ≥ 10mm, height ≥ 20mm, optional hanging net basket, etc
17. The pallet fixing method adopts reinforced aluminum alloy tripod support, the length of the tripod is ≥ 155mm, and the thickness is ≥7mm;
18 drawers: 1 pc, carrying capacity≥ 20Kg. Drawer inner diameter ≥ 40mm, width ≥ 270mm, height ≥ 70mm, drawer with automatic suction design;
19. Standard configuration of gas terminal: oxygen * 1pc, negative pressure suction * 1pc;
20. Power sockets: 6pcs, 220V, 10A (compatible with international plugs);
21. Grounding terminal: 2pcs; Network interface: RJ45, 1pc;
22. Ceiling installation, stable and firm.
