PRODUCT DETAILS
▲The inside of the suspension bridge box adopts a gas-electricity separation design to ensure the safety of use: the bottom end of the box must have an oxygen drain hole design to prevent the accumulation of oxygen in the tower and the power line caused by fire accidents.
▲Gas terminal all gas sockets and joints are produced by the original factory, the terminal through antibacterial (E. coli) detection, gas sockets are identified as different colors and different shapes, with anti-mis-insertion function, and have Standby (in place to be connected) function, socket plug can ensure more than 20,000 times of plugging and unplugging, can be repaired with gas;
▲The power socket is AC 220V and has a separate grounding wire, the socket needs to have an equipotential grounding terminal, the grounding wire shall not be shared with the grounding of the pendant, and communication interfaces, video interfaces, network interfaces and other equipment can be installed as needed. The suspension bridge bearing adopts needle roller type, and the number of rotations is not less than 100,000 times.
▲The suspension bridge has a safety load device with four times the load-bearing coefficient.
1. Power supply: AC220V, 50Hz; Input power: 6KVA;
2. Bridge length 2000~3000mm (the actual size is subject to the actual measurement of the user's site); The thickness of the main profile of the bridge body ≥ 18mm, in order to ensure the load-bearing strength of the product, the thickness of the bridge body hanging pipe connection ≥ 34mm;
3. Equipped with ambient lighting * 2pcs, optional LED auxiliary lighting with independent suspension arm system, the number of LED lamp beads ≥ 28, lamp head diameter ≤ 20cm, illuminance ≥ 35000LUX;
4. Wet section tower: frame structure design, 1pc, using imported linear guide rail, the center distance between the two tracks is 190mm, the overall length of the slide rail is ≥600mm, and the tower body can move left and right ≥ 500mm.
5. The frame box beam length is 650mm, the beam width is 165mm, and the beam height is 110mm; The oval profile support frame on both sides of the built-in power supply is 120mm long, 53mm wide and 860mm high. The inner diameter of the pallet slide is 70mm, and the distance between the two frames is 440mm.
6. Pallet * 2pcs, fixing method using reinforced aluminum alloy tripod support, tripod length ≥ 120mm, width ≥ 40mm, thickness ≥ 8mm, both sides of the tripod fixed slide rail center distance ≥ 134mm, pallet including side rail length ≥ 515mm, excluding side rail length ≥ 455mm, width ≥ 400mm, thickness ≥ 25mm, stainless steel side rail length ≥ 350mm, width ≥ 10mm, height ≥ 20mm, optional hanging net basket, etc.;
7. Drawer: 1pcs, carrying weight≥ 20Kg. Drawer inner diameter ≥ 320mm, width ≥ 240mm, height ≥ 120mm, pull-out length ≥ 20mm; Drawer outer diameter size≥ length 430mm, width ≥ 300mm, height ≥ 160mm; Drawer with automatic suction design;
▲ Gas terminal standard configuration (installed on the bridge): oxygen * 1pc, compressed air * 1pc, negative pressure suction * 1pc; Optional negative pressure suction device and oxygen inhaler
1. Each set is configured with power sockets: each side of the frame has a power supply *3pcs, a total of 6 (compatible with Chinese, American and British standards);
2. Equipped with 1 set of rotatable extension infusion rack, rotating arm ≥ 350mm.
3. Grounding terminal: 2pcs; Network interface: RJ45, 1pc;
4. Trunk section tower: frame structure design, 1 pc; It adopts imported linear guide rail, the distance between the two tracks is 190mm, the overall length of the slide rail is: 600mm, and the left and right moving distance is 500mm.
5. Instrument platform: 2 layers (carrying capacity≥ 50Kg, height adjustable)
6. Drawer: 1pcs, carrying capacity≥ 20Kg. Drawer inner diameter ≥ 320mm, width ≥ 240mm, height ≥ 120mm, pull-out length ≥ 20mm; Drawer outer diameter size≥ length 430mm, width ≥ 300mm, height ≥ 160mm; Drawer with automatic suction design;
7. Standard configuration of gas terminal (installed on the bridge): oxygen * 1pc, negative pressure suction * 1pc;
8. Each set is configured with power sockets: each side of the frame with power supply *3 pcs, a total of 6 (compatible with national, American and British standards).
9. Grounding terminal *2pcs; Network interface: RJ45, 1pc; Ceiling mounting, stable and secure.
