PRODUCT DETAILS
▲The inside of the suspension bridge box adopts a gas-electricity separation design to ensure the safety of use: the bottom end of the box must have an oxygen drain hole design to prevent the accumulation of oxygen in the tower and the power line caused by fire accidents.
▲ Gas terminal all gas sockets and joints are produced by the original factory, the terminal through antibacterial (E. coli) detection, gas sockets are identified as different colors and different shapes, with anti-mis-insertion function, and have Standby (in place to be connected) function, socket plug can ensure more than 20,000 times of plugging and unplugging, can be repaired with gas;
▲The power socket is AC 220V and has a separate grounding wire, the socket needs to have an equipotential grounding terminal, the grounding wire shall not be shared with the grounding of the pendant, and communication interfaces, video interfaces, network interfaces and other equipment can be installed as needed.
▲The suspension axle bearing adopts needle roller type, and the number of rotations is not less than 100,000 times.
★ The suspension bridge has a safety load device with a fourfold load factor
1. Working power: AC220V, 50Hz; Input power: 6KVA;
2. Bridge length 2000~3000mm (the actual size is subject to the actual measurement of the user's site); The thickness of the main profile of the bridge body ≥ 18mm, in order to ensure the load-bearing strength of the product, the thickness of the bridge body hanging pipe connection ≥ 34mm;
3. Equipped with ambient lighting * 2pcs, optional LED auxiliary lighting with independent suspension arm system, the number of LED lamp beads ≥ 28, lamp head diameter ≤ 20cm, illuminance ≥ 35000LUX;
4. Box: 1pc, using imported linear guide rail, the center distance between the two tracks is 190mm, the overall length of the slide rail is ≥600mm, and the tower body can move left and right ≥ 500mm; Mechanically damping brake system with adjustable resistance.
5. The box rotates ≥ 340º, the height ≥ 900mm, the trapezoidal box has no angular design (length 36CM x width 21CM), the left and right sides of the box are equipped with a stainless steel infusion pump bracket, the upper and lower fixation devices of the syringe pump frame, the upper section is a four-section pagoda-shaped, and the lower section is a spiral fixed structure.
6. The center distance between the infusion pump brackets on both sides is ≥ 450mm, the length of the infusion pump bracket is ≥830mm, and the diameter of the infusion pump bracket is ≥ 25mm; Can hang ≥ 6 infusion pump syringe pump of different specifications; Equipped with a rotatable extension infusion rack*1 set, swivel arm ≥ 350mm.
7. Instrument platform: 2 layers (bearing weight ≥50Kg, height adjustable), pallet fixing method adopts reinforced aluminum alloy tripod support, tripod length ≥ 120mm, width ≥ 40mm, thickness ≥ 8mm, both sides of the tripod fixed slide rail center distance ≥ 134mm, pallet including side rail length ≥ 515mm, excluding side rail length≥ 455mm, width ≥ 400mm, thickness ≥ 25mm, stainless steel side rail length ≥ 350mm, width ≥ 10mm, height ≥ 20mm, optional hanging net basket, etc.;
8. Drawer: 1pc, carrying capacity≥ 20Kg. Drawer inner diameter ≥ 320mm, width ≥ 240mm, height ≥ 120mm, pull-out length ≥ 20mm; Drawer outer diameter size≥ length 430mm, width ≥ 300mm, height ≥ 160mm; Drawer with automatic suction design;
▲Standard configuration of body terminal: oxygen * 2pcs, negative pressure suction * 2pcs, compressed air * 1pc; Optional negative pressure suction device, and oxygen inhaler;
▲Power sockets: 6pcs, 220V, 10A (compatible with international plugs);
▲Grounding terminal: 2 pcs; Network interface: RJ45, 1pc; Configurations can be upgraded according to customer requirements. Ceiling mounting, stable and secure.
